top of page

HDPE made via Spherilene Gas-Phase Technology

52505 is a HDPE copolymer which is manufactured in gas phase process. This grade is an injection molding grade for applications requiring a good physical property even at low temperatures, like pails, containers and technical moldings.

HDPE: HD52505| HD62505UV

Characteristic Properties

Good Physical Property even at low temperatures

Density: 0.950-0.954

Main Applications

Caps and closures for mineral water bottles

Caps for sparkling water and carbonated soft drinks, beverage caps.

Density: 0.95-0.954

Additives

HD-52505:

Thermal Antioaxidant (Process Stabilizer)

Catalyst neutralizer(acid scavenger, lubricant)

HD-52505 UV:

Thermal Antioxidant (process Stabilizer)

Antiblocking Agent

Catalyst neutralizer (acid scavenger, lubricant)

UV Stabilizer

Resin Properties
Unit
Typical Value
Test Method
Melt Index (190°C/ 2.16KG)
g/10 min
5
D1238
Density
g/cm³
0.952
D1505
Thermal Properties
Unit
Typical Value
Test Method
Vicat Softening Point
°C
124
D1525
Molded Properties
Unit
Typical Value
Test Method
Flectural Modulus
Mpa
1200
D790
Tensile Strength at Yield
Mpa
27
D638
Tensile Strength at Break
Mpa
13
D638
H.D.T
°C
67
D648
Notched Izod Impact @ 23°C
J/m
29
D256/A

HD52518

HDPE made via Spherilene Gas-Phase Technology

52518 is a HDPE copolymer for injection Maudling for applications requiring a good balance between easy of processability and flowability and mechanical properties.

HDPE: HD52518

Characteristic Properties

Good balance between easy of processability and flowability

Density: 0.950-0.954

Main Applications

Housewares

High fluidity

Injection moulding

Density: 0.950-0.954

Additives

Thermal Antioxidant (process Stabilizer)

Catalyst neutralizer (acid scavenger, lubricant)

Ressin Properties
Unit
Typical Value
ASTM Method
Melt Index (190°C/ 2.16Kg)
g/10 min
18
D1238
Density
g/ml
0.952
D1505
Thermal Properties
Unit
Typical Value
Test Method
Vicat Softening Point
°C
121
D1525
Moulded Properties @
Unit
Typical Value
Test Method
Flexural Modulus
MPa
1200
D790
Notched Izod Impact @ 23° C
J/m
19
D256/A

HDPE made via Hostalen

HF-4760(BL3) is a blow molding grade resin with high density polyethylenee with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer. Stifness, good ESCR are it's spetial properties. High rigidity and good flowability which made it proper for usage in bottles and small blow molding goods.

HDPE: HF-4760(BL3)

Characteristic Properties

High density and stiffness

Good flowability and impact Strength

Good Stress Cracking resistance

Density: 0.952-0.956 g/cm3

Main Applications

For container with capacities ranging from a few ml up to 10 Liters, also for production of sheets for thermoforming.

Density: 0.952-0.956 g/cm3

Additives

Antioxidant/Process stabilizer

Lubricant/ acid scavenger

Resin Properties
Unit
Typical Value
Test Method
Melt Index(21.6)
g/10 min
23
ISO 1133
Melt Index(5)
g/10 min
1.2
ISO 1133
FRR (21.6/5)
-
19
-
Density
g/cm³
0.954
ISO 1183
Molded Properties
Unit
Typical Value
Test Method
Notched Impact @ 23°C
mJ/mm²
9
ISO 179/ 1 eA

HM9450F (EX5)

HDPE: HM9450F (EX5)

HM-9450F (EX5) is blown film grade resin which is manufacture(EX5) is a bi-model high density polyethylene with 1-Butene as co monomer

HDPE: HM9450F (EX5)

Characteristic Properties

High molar mass film grade

Good stiffness and tenacity

Density: 0.947-0.951 g/cm3

Main Applications

For blown films with paper like quality, suitable for counter bags, carrier bags and wrapping films.

Excellent processing.

Density: 0.947-0.951 g/cm3

Additives

Antioxidant/Process stabilizer

Lubricant/ acid scavenger

Test/Composition
Typical Value
Unit
ASTM Method
Density
0.949
g/cm3
ISO 1183
Fish Eye Note
<3
note
Internal
FRR 21.6/5
29
h
MFR 190°/21.6
8.0
g/10 min
ISO 1133
MFR 190°/5
0.28
g/10 min
ISO 1133
bottom of page