top of page

PP Blown Perfect 1000

​Product Information

ultra-high melt flow, narrow molecular weight polypropylene homopolymer resin is suitable for melt blown applications. This material is available in spherical particle form. which is recommended for use in nonwoven melt blowing process.

Benefits & Features :

PP Blown Perfect special polymer structure gives the following properties: 

  • Good melt blown process ability 

  • Fine micro fibers 

  • Excellent barrier properties  

  • Reduced process energy demand 

No residual (less than 100ppm) 

Typical Characteristics

Properties
Conditions
Test Methods
Values
Units
Thermal Melting Temperature
DSC 1nd heating 10°C/min
ISO 11357-3
168
°C
Physical Density ISO 1872-1
23°C
ISO 1183-1
900
kg/m³
Rheological Melt Flow Rate
230°C/2.16Kg
ISO 1133-1
1500
g/10min

Storage

The product should be stored in a dry and dust free environment at temperature below 50°C. Exposure to direct sunlight should be avoided as this may lead to product deterioration.  It is advised to process the product within maximum two years after delivery.

bottom of page